Repair Solution

Kampa Repair Solution will adhere to almost any surface for fast, strong and extremely durable repairs to thousands of items. Ideal for sealing and repairing holes and rips in tents, awnings and other inflatable products.

Repair Products
This is part of the Kampa repair products range.

  • Permanently repairs repairs holes and rips in most materials
  • Can be used as a seam sealant
Model Code Contents
Repair Solution CA9011 3 x 5g tubes (net. weight: 15g)

 

Instructions for use

Clean the area to be repaired with soap and water. De-grease the surface with alcohol. Apply Repair Solution directly to the area to be repaired allowing a 6mm overlap beyond the rip or hole. Keep the repair flat and allow to cure. Kampa Repair Solution is touch dry in 2-4 hours. Allow 10-12 hours for full cure. Use several layers of repair solution for extra strength. Tears and rips: apply an adhesive tape over the front of the tear or hole. Apply the repair solution to the reverse side and allow at least a 6mm overlap beyond the rip or hole. The tape can then be removed.

Seams: Use a small brush to apply a thin layer of repair solution to the seam making sure that you work the solution into the sewing holes. Dust with talcum powder when cured for a non-tacky finish.

Storage: Squeeze remaining contents to the top of the tube. Replace cap ensuring there is no air in the top of the tube or cap. Partially used tubes are best stored in the freezer. Warm to room temperature before use. Kampa Repair Solution is sensitive to moisture.